Tailgate Lock Actuator Test

Open the tailgate.
Remove the tailgate lower trim panel (see TRIM REMOVAL/INSTALLATION - TAILGATE AREA ).
Disconnect the 2P connector (A) from the tailgate lock actuator (B).

Fig 1: Identifying Tailgate Lock Actuator 2P Connector Terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check actuator operation by connecting power and ground according to the table below. To prevent damage to the actuator, apply battery voltage only momentarily.

Fig 2: Identifying Actuator Lock & Unlock Position Table
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the actuator does not operate as specified, replace it.