FixVault
Home › Honda › 2012 › Fit Base, Automatic Trans › Repair and Diagnosis › Body & Frame › Exterior/Interior Trim › Dashboard › Beverage Holder Removal/Installation

Beverage Holder Removal/Installation

NOTE:
  • Put on gloves to protect your hands.
  • Take care not to scratch the dashboard or its related parts.
  1. Remove the dashboard/steering hanger beam (see DASHBOARD/STEERING HANGER BEAM REMOVAL/INSTALLATION  ).
  2. Remove the screws, then remove the beverage holders (A) from both ends of the dashboard (B).
    Fig 1: Identifying Beverage Holders & Dashboard
    G05959561Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the beverage holders in the reverse order of removal.
About FixVault