Rear Seat-back Striker Replacement

Remove these items:
- Rear door inner seal, as needed (see step 3 on TRIM REMOVAL/INSTALLATION - PILLAR AREAS )
- Tailgate weatherstrip, as needed (see INNER RECLINE COVER )
- Cargo floor (see step 1 on TRIM REMOVAL/INSTALLATION - CARGO AREA )
- Cargo floor box, with temporary repair kit (TRK) (see step 3 on TRIM REMOVAL/INSTALLATION - CARGO AREA )
- Rear trim panel (see step 4 on TRIM REMOVAL/INSTALLATION - CARGO AREA )
- Cargo area side trim panel (see TRIM REMOVAL/INSTALLATION - REAR SIDE AREA )
Remove the bolts, then remove the rear seat-back striker (A).

Fig 1: Rear Seat-Back Striker Bolts With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the striker in the reverse order of removal.