O-ring Replacement

WARNING: This page is about a different variant/trim than selected.

Remove the slave cylinder.
Remove the roll pins (A), then remove the clutch line connector (B) and the O-ring (C) from the slave cylinder (D).

Fig 1: Identifying Roll Pins, Clutch Line Connector, O-Ring & Slave Cylinder
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the clutch line connector (A) with a new O-ring (B), then set in new roll pins (C) to the slave cylinder (D).

Fig 2: View Of Roll Pins, Clutch Line Connector, O-Ring & Slave Cylinder
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the slave cylinder.