Substituting the MCM

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required

Honda Diagnostic System (HDS) tablet tester
Honda Interface Module (HIM) and an iN workstation with the latest HDS software version
HDS pocket tester
GNA600 and an iN workstation with the latest HDS software version

Any one of the above updating tools can be used.

Use this procedure when you have to substitute a known-good MCM during a troubleshooting procedure.

Remove the MCM (see MOTOR CONTROL MODULE (MCM) REMOVAL/INSTALLATION ).
Install a known-good MCM.
Do the MOTOR ROTOR POSITION CALIBRATION in the ADJUSTMENT MENU with the HDS.