DTC 31-01: Torque Sensor Neutral Position Not Written
- Turn the ignition switch to ON (II).
- Clear the DTC with the HDS.
- Turn the ignition switch to LOCK (0).
- Do the memorizing of the torque sensor neutral position (see MEMORIZING THE TORQUE SENSOR NEUTRAL POSITION ).
- Turn the ignition switch to ON (II).
- Check for DTCs with the HDS.
Is DTC 31-01 indicated?
YES -Replace the EPS control unit (see EPS CONTROL UNIT REMOVAL/INSTALLATION ).
NO -Intermittent failure, the system is OK at this time.