Forced Starting of the Audio-Navigation Unit

Special Tools Required 

SCS Service Connector 07PAZ-001010A

1. Turn the ignition switch to LOCK (0).
2. Open the glove box, and disconnect the glove box damper from the pivot of the glove box (see step 1 on GLOVE BOX REMOVAL/INSTALLATION ).
3. Connect the SCS service connector (A) to the navigation service check connector (B) located by the passenger's dash.
   Fig 1: Locating SCS Service Connector And Navigation Service Check Connector

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Turn the ignition switch to ON (II).
5. Check that the diagnosis menu for the picture diagnosis starts up, and then changes to the System Links menu.
   NOTE: If the navigation display fails to display the System Links screen, refer to NO PICTURE IS DISPLAYED TROUBLESHOOTING  .