FixVault
Home › Honda › 2012 › Odyssey EX › Repair and Diagnosis › Accessories & Equipment › Entertainment Systems › Navigation System › Rearview Camera Removal/Installation

Rearview Camera Removal/Installation

NOTE:
  • Put on gloves to protect your hands.
  • Take care not to scratch the tailgate and related parts.
  1. Remove the tailgate lower trim panel (see TRIM REMOVAL/INSTALLATION - TAILGATE AREA ) and the rear license trim (see REAR LICENSE TRIM REPLACEMENT ).
  2. Disconnect the connectors (A), and detach the harness clips.
    Fig 1: Locating Connectors And Rearview Camera Assembly
    G06971243Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the nuts, and rearview camera assembly (B).
  4. Remove the screws and the rearview camera (A).
    Fig 2: Locating Screws And Rearview Camera
    G06971244Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the rearview camera in the reverse order of removal.
About FixVault