FixVault
Home › Honda › 2013 › Fit Base, Automatic Trans › Repair and Diagnosis › Body & Frame › Mirrors › Power Mirrors › Power Mirror Actuator Test › Power Mirror Defogger Test

Power Mirror Defogger Test

  1. Remove the door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
  2. Disconnect the power mirror 6P connector (A).
    Fig 1: Identifying Power Mirror 6P Connector
    G05960158Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Measure the resistance between terminals No. 1 and No. 3 of the 6P connector. There should be about 7 Ω.
  4. If the resistance is not as specified, check for an open in the wire between the connector and the mirror holder. If the wire is OK, replace the mirror holder. (See MIRROR HOLDER REPLACEMENT ).
About FixVault