FixVault
Home › Honda › 2013 › Fit Base, Standard Trans › Repair and Diagnosis › Engine Mechanical › Cooling System (Mechanical) › Engine Cooling System › Fan Motor Test

Fan Motor Test

  1. Disconnect the 2P connectors from the radiator fan motor and condenser fan motor.
    Fig 1: Identifying Radiator Fan Motor 2P Connectors Terminals
    G05952711Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Test the motor by connecting battery power to No. 2 terminal and ground to No. 1 terminal.
  3. If the motor fails to run, or does not run smoothly, replace it.
About FixVault