FixVault
Home › Honda › 2014 › CR-V EX-L, 2.4L Eng, AWD › Repair and Diagnosis › External Pages › Different car › Section 150 (Entry Lights Control System) › Ignition Key Switch Test

Ignition Key Switch Test

WARNING: This page is about a different car, the 2011 Honda CR-V, 2010 Honda CR-V, 2009 Honda CR-V, 2008 Honda CR-V, and 2007 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering column upper and lower covers (see STEERING COLUMN REMOVAL AND INSTALLATION ).
  2. Disconnect the 6P connector (A).
    Fig 1: Checking Continuity Between Ignition Key Switch Terminals No. 1 And No. 2
    G06612265Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between terminals No. 1 and No. 2.
    • There should be continuity with the key in the ignition switch.
    • There should be no continuity with the key removed.
  4. If the continuity is not as specified, replace the steering lock assembly (see STEERING LOCK REPLACEMENT ).
About FixVault