Connecting Rod Bolt Inspection
WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the diameter of each connecting rod bolt at point A and point B with a micrometer.
- Calculate the difference in diameter between point A and point B.
Point A-Point B = Difference in Diameter
Difference in Diameter:
Specification: 0-0.05 mm (0-0.002 in.)
- If the difference in diameter is out of specification, replace the connecting rod bolt.