A/C Compressor Thermal Protector Replacement

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.

Remove the bolt and the holder (A). Disconnect the field coil connector (B), then remove the thermal protector (C).

Fig 1: Holder, Field Coil Connector & Thermal Protector With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Replace the thermal protector (A) with a new one, and apply silicone grease (P/N 08798-9028) (6) to the bottom of the thermal protector.

Fig 2: Applying Silicone Grease To Bottom Of Thermal Protector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the thermal protector in the reverse order of removal.