FixVault

A/C Switch Replacement

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the heater-A/C control panel (see HEATER-A/C CONTROL PANEL REMOVAL/INSTALLATION  ).
  2. Disconnect the 5P connector (A), and push out the A/C switch (B) from behind the heater control panel.
    Fig 1: Identifying 5P Connector & A/C Switch
    G05959823Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the holder (A) and the bulbs (B).
    Fig 2: Identifying Holder & Bulbs
    G05959824Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the A/C switch in the reverse order of removal.