FixVault
Home › Honda › 2014 › Fit › Repair and Diagnosis › External Pages › Different car › Section 35 (Air Conditioning) › Mode Control Switch Test

Mode Control Switch Test

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the heater-A/C control panel (see HEATER-A/C CONTROL PANEL REMOVAL/INSTALLATION  ).
  2. Check for continuity between heater-A/C control panel 6P connector terminals No. 1 and No. 2, while rotating the mode control dial from (A) and (B).
    Fig 1: Checking Continuity Between Heater-A/C Control Panel 6P Connector Terminals No. 1 & No. 2
    G05959822Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. If there is no continuity, replace the mode control switch (see HEATER CONTROL PANEL DISASSEMBLY AND REASSEMBLY ).
About FixVault