FixVault
Home › Honda › 2014 › Fit › Repair and Diagnosis › External Pages › Different car › Section 71 (Automatic Transmission) › ATF Filter Replacement

ATF Filter Replacement

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner assembly (see AIR CLEANER REMOVAL/INSTALLATION ).
  2. Disconnect the ATF cooler hoses (A) from the ATF filter (B).
    Fig 1: Disconnecting ATF Cooler Hoses From ATF Filter
    G06768527Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the ATF filter holder (C).
  4. Remove the ATF filter, and replace it.
  5. Install the new ATF filter on the filter mounting bracket (D), and secure it with its holder and bolt.
  6. Slide the ATF cooler hose on the ATF filter until the hose end contacts the filter housing, and secure the hose with the clip (E) at 6-8 mm (0.24-0.31 in) (F) from the filter housing. Install the cooler hose on the other side of the ATF filter in the same manner.
  7. Install the air cleaner assembly (see AIR CLEANER REMOVAL/INSTALLATION ).
About FixVault