FixVault
Home › Honda › 2014 › Pilot EX, 4WD › Repair and Diagnosis › External Pages › Different car › Section 79 (Navigation System) › DTC Troubleshooting › DTC 1307: DVD Read Error

DTC 1307: DVD Read Error

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Check the vehicle battery condition first.
  • Check any official Honda service website for more information about the navigation system.
  • Before you troubleshoot, make sure to follow GENERAL TROUBLESHOOTING INFORMATION  .
  1. Check the navigation DVD.

    Is the navigation DVD the correct color and version for the vehicle? 

    Is it scratch free? 

    YES  - Go to step  2.

    NO  - Replace the navigation DVD (see DVD-ROM REPLACEMENT  ) and retest.

  2. Turn the ignition switch to ON (II).

    Is there a DVD error message? 

    YES  - Go to DVD screen error messages (see PC CARD FAQS  ).

    NO  - Go to step  3.

  3. Clear the hard error code (see HOW TO CLEAR ERROR HISTORY  ).
  4. Turn the ignition switch to LOCK (0), then back to ON (II).
  5. Check for the hard error code (see HOW TO CHECK ERROR HISTORY  ).

    Is DTC 1307 indicated? 

    YES  - Replace the navigation unit (see NAVIGATION UNIT REMOVAL/INSTALLATION  ). ■

    NO  - Intermittent failure, the system is OK at this time. ■

About FixVault