DTC 1402: Audio Error 2
WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Check the vehicle battery condition first.
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow GENERAL TROUBLESHOOTING INFORMATION .
- Clear the hard error code (see HOW TO CLEAR ERROR HISTORY ).
- Turn the ignition switch to LOCK (0), and then back to ON (II).
- Check for the hard error code (see HOW TO CHECK ERROR HISTORY
).
Is DTC 1402 indicated?
YES - Go into the Self-diagnostic Function in the audio unit, and check CD Error Codes (see ERROR CODES ). If the error codes is not indicated, go to Symptom Troubleshooting for the audio disc changer. ■
NO - Intermittent failure, the system is OK at this time. ■