DTC 2603: Display Diag. RAM
WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Check the vehicle battery condition first.
- Check any official Honda service website for more service information about the navigation system.
- Check for B-CAN DTCs and resolve them before troubleshooting.
- Before you troubleshoot, make sure to follow GENERAL TROUBLESHOOTING INFORMATION .
- Clear the hard error code (see HOW TO CLEAR ERROR HISTORY ).
- Turn the ignition switch to LOCK (0), then back to ON (II).
- Go into the Diagnostic Menu, and select the Unit Check in the Detail Information & Setting (see SYSTEM DIAGNOSTIC MODE ).
- Check the Display test.
Is the RAM NG?
YES - Replace the navigation display unit (see NAVIGATION DISPLAY UNIT REMOVAL/INSTALLATION ). ■
NO - Intermittent failure, the system is OK at this time. ■