With HandsFreeLink

SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ), and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or service.

1. Remove the driver's airbag assembly (see DRIVER'S AIRBAG REPLACEMENT ).
2. Turn the steering wheel to right, the loosen the screw (A) from the back to the steering wheel.
   Fig 1: Turning Steering Wheel To Right

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Remove the screws (A) from the steering wheel.
   Fig 2: Identifying Steering Wheel Trim And Screws

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Disconnect the connectors, and remove the steering wheel trim (B).
5. Remove the screws and the HFL switch (A).
   NOTE: The HFL-navigation voice control switch and the HFL switch are the same parts.
   Fig 3: Identifying HFL Switch

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
6. Remove the screw and the audio remote switch (A).
   Fig 4: Identifying Audio Remote Switch

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
7. Install the audio remote switch in the reverse order of removal.