Forced Starting of the Navigation Unit

Special Tools required 

SCS Service Connector 07PAZ-0010100

1. Turn the ignition switch to LOCK (0).
2. Remove the right kick panel (see TRIM REMOVAL/INSTALLATION - DOOR AREAS ).
3. Connect the SCS service connector (A) to the navigation service check connector (B) located by the right kick panel.
   Fig 1: Identifying SCS Service Connector And Navigation Service Check Connector

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Turn the ignition switch to ON (II).
5. Check that the diagnosis menu for the picture diagnosis starts up, and then changes to the System Link menu.