Knock Sensor Replacement

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.

Remove the intake manifold (see INTAKE MANIFOLD REMOVAL AND INSTALLATION ).
Remove the injector base (see INJECTOR BASE REMOVAL AND INSTALLATION ).
Disconnect the knock sensor connector (A).
Remove the knock sensor (B).

Fig 1: Identifying Knock Sensor Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the parts in the reverse order of removal.