FixVault

Power Mirror Switch Test/Replacement

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the power window master switch (see REAR POWER WINDOW SWITCH TEST/REPLACEMENT ).
  2. Disconnect the 13P connector from the power mirror switch (A).
    Fig 1: Identifying Power Mirror Switch & 13P Connector
    G05966523Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between the terminals in each switch position according to the table below.

    Power Mirror Switch 

    Fig 2: Identifying Terminal Position Table
    G05966524Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. If the continuity is not as specified, remove the screws and replace the power mirror switch.