Inside Tailgate Switch Test/Replacement

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.

Carefully pry out the inside tailgate switch (A), and disconnect the 5P connector (B) from switch.

Fig 1: Identifying Inside Tailgate Switch & 5P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each switch position according to the table below.

Fig 2: Identifying Terminal Switch Position Table

G05966785

Courtesy of AMERICAN HONDA MOTOR CO., INC.

If the continuity is not as specified, replace the bulbs (C) or the switch.