FixVault
Home › Honda › 2014 › Pilot EX, FWD › Repair and Diagnosis › External Pages › Different car › Section 77 (Audio System) › Audio-HVAC Display Unit Removal/Installation

Audio-HVAC Display Unit Removal/Installation

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Put on gloves to protect your hands.
  • Take care not to scratch the dashboard.
  1. Remove the audio unit (see AUDIO UNIT REMOVAL/INSTALLATION  ) and the center upper panel (see CENTER UPPER PANEL REMOVAL/INSTALLATION ).
  2. Remove the screws and bolts, then pull out the audio-HVAC display unit (A).
    Fig 1: Identifying Audio-HVAC Display Unit & Connector
    G05966999Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the connectors (B), and remove the audio-HVAC display unit.
  4. Separate the audio-HVAC display unit (A) and the tray (B).
    Fig 2: Identifying Audio-HVAC Display Unit & Tray
    G05967000Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the audio-HVAC display unit in the reverse order of removal.
About FixVault