Subwoofer and Test
WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the right rear side trim panel (see TRIM REMOVAL/INSTALLATION - REAR SIDE AREA ).
- Disconnect the 2P connector (A), then remove the bolts, nuts and pull out the subwoofer (B).
- Measure the resistance between terminals No. 1 and No. 2. There should be about 2 Ω.
- If the resistance is not as specified, replace the subwoofer.