USB Adapter Unit Replacement

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.

Remove the passenger's center console trim (see CENTER CONSOLE REMOVAL/INSTALLATION ).
Loosen the bolts and detach the harness clip (A), then pull out the stay (B).

Fig 1: Identifying Harness Clip & Bolt
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the connectors (A), then remove the bolts and the USB adapter unit (B).

Fig 2: Identifying USB Adapter Unit, Connectors & Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the USB adapter unit in the reverse order of removal.