Transfer Hypoid Drive Gear Bearing Replacement

Special Tools Required 

• Driver Handle, 15 x 135L 07749-0010000
• Bearing Driver Attachment, 42x47 mm 07746-0010300
• Installer Attachment 40 mm 07LAD-PW50601

1. Remove the tapered roller bearing (A) from the transfer hypoid drive gear (B) using the driver handle, the 42 x 47 mm bearing driver attachment, bearing separator (C), and a press.
   Fig 1: Removing Tapered Roller Bearing From Transfer Hypoid Drive Gear Using Driver Handle And Press

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install a new tapered roller bearing (A) on the transfer hypoid drive gear (B) using the driver handle, the 42 x 47 mm bearing driver attachment, the 40 mm attachment, and a press.
   Fig 2: Installing Tapered Roller Bearing On Transfer Hypoid Drive Gear Using Driver Handle And Press

   Courtesy of AMERICAN HONDA MOTOR CO., INC.