FixVault
Home › Honda › 2014 › Pilot EX-L, 4WD › Repair and Diagnosis › External Pages › Different car › Section 137 (Power Windows) › Passenger's Power Window Switch Test/Replacement › Front Passenger's

Front Passenger's

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Honda Ridgeline, 2013 Honda Ridgeline, 2012 Honda Ridgeline, 2011 Honda Ridgeline, and 2010 Honda Ridgeline. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front passenger's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
  2. Remove the four mounting screws, then remove the power window switch (A) from the switch panel (B).
    Fig 1: Identifying Power Window Switch And Switch Panel With Mounting Screws
    G05968791Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between terminals No. 3 and No. 4. There should be continuity.
  4. Check for continuity among terminals No. 8, No. 9 and No. 10. There should be continuity.
  5. If the continuity is not as specified, replace the front passenger's power window switch. If the continuity is OK, go to step 6.
  6. Test the switch by connecting battery power to the terminal No. 6 and connecting ground to the terminal No. 9.
  7. Measure the battery voltage between terminals No. 9 and No. 10 with the UP operation. There should be battery voltage.
  8. Measure the battery voltage between terminals No. 8 and No. 9 with the DOWN operation. There should be battery voltage.
  9. If the battery voltage is not as specified, replace the front passenger's power window switch.
  10. Install the switch in the reverse order of removal.
About FixVault