Exploded View

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Honda Ridgeline, 2013 Honda Ridgeline, 2012 Honda Ridgeline, 2011 Honda Ridgeline, and 2010 Honda Ridgeline. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of ATF Cooler Hose

Courtesy of AMERICAN HONDA MOTOR CO., INC.

NOTE: When installing the hose clamps, make sure they do not interfere with the surrounding parts.

Install the ATF cooler hoses over the ATF cooler lines with the clips at the appropriate points in reference to the following list.

ATF COOLER HOSES INSTALLATION POINTS

Point	Distance from Hose End to Clip (G)	Hose End Contact Point
A	2-4 mm (0.1-0.2 in)	Bulge
B	2-4 mm (0.1-0.2 in)	Bulge
C	6-8 mm (0.2-0.3 in)	Bulge
D
E
F

Secure the hose with the clip (H), aligning the tab (I) upward.
Secure the ATF cooler hose with the clamp (J) at the marking (K).
Refill the transmission with ATF to the proper level (see ATF LEVEL CHECK ).