Accelerator Pedal Module Removal/Installation

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the APP sensor 6P connector (A).

Fig 1: APP Sensor 6P Connector & Accelerator Pedal Module Nuts With Torque Specifications

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Remove the accelerator pedal module (B).
NOTE: The APP sensor is not available separately. Do not disassemble the accelerator pedal module.
Install the parts in the reverse order of removal.