FixVault
Home › Honda › 2015 › Pilot EX, FWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › A/T Gear Position Indicator › A/T Gear Position Indicator Panel Replacement

A/T Gear Position Indicator Panel Replacement

NOTE:
  • Refer to the SHIFT LEVER DISASSEMBLY AND REASSEMBLY  as needed during the following procedures.
  • Make sure not to get any silicone grease on the terminal part of the connectors and switches, especially if you have silicone grease on your hands or gloves.
  1. Remove these items:
  2. Shift the shift lever to N.
  3. Disconnect the D3 switch connector (A).
    Fig 1: Disconnecting Switch Connector
    G08087406Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the screws (A), and remove the shift lever knob (B) from the shift lever.
    Fig 2: Identifying Screws And Shift Lever Knob
    G08087407Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Remove the A/T gear position indicator panel light socket (A) from the A/T gear position indicator panel (B), and remove the A/T gear position indicator panel.
    Fig 3: Removing A/T Gear Position Indicator Panel Light Socket From A/T Gear Position Indicator Panel
    G08087408Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Disassemble the indicator panel (A), the escutcheon body (B), the select cover (C).
    Fig 4: Indicator Panel, Escutcheon Body And Select Cover
    G08087409Courtesy of AMERICAN HONDA MOTOR CO., INC.
  7. Install a new indicator panel, the escutcheon body, the select cover, and assemble the A/T gear position indicator panel.
  8. Install the A/T gear position indicator panel (A), and install the A/T gear position indicator panel light socket (B) in the A/T gear position indicator panel.
    Fig 5: Installing A/T Gear Position Indicator Panel
    G08087410Courtesy of AMERICAN HONDA MOTOR CO., INC.
  9. Apply silicone grease to the top of the shift lever rod (A), and install the shift lever knob (B).
    Fig 6: Shift Lever Rod And Shift Lever Knob With Torque Specifications
    G08087411Courtesy of AMERICAN HONDA MOTOR CO., INC.
  10. Secure the shift lever knob with new screws (C).
  11. Connect the D3 switch connector (A).
    Fig 7: Connecting Switch Connector
    G08087412Courtesy of AMERICAN HONDA MOTOR CO., INC.
  12. Install these items:
About FixVault