Check Procedure

Courtesy of HONDA, U.S.A., INC.

NOTE:  This test should be done with original equipment tires and wheels at the correct tire pressure.

1. Start the engine, and let it idle

2. Attach a commercially available spring scale (A) to the steering wheel. With the engine idling and the vehicle on a clean, dry floor, pull the scale as shown, and read it as soon as the tires begin to turn.

3. If the scale reads no more than the specification, the power assist is OK. If it reads more, check these items:

• Steering linkage 
• Rack guide adjustment 
• EPS system