Audio-Navigation System DTC 2610
DTC 2610 : DRAM Diag
- Check the vehicle 12 volt battery condition first .
- This navigation DTC sets when a problem with the internal DRAM is detected (the HMI Unit icon is red in the System Links).
- Before you troubleshoot, make sure to follow the General Troubleshooting Information .
- Check any official Honda service website for more service information about the navigation system.
- Problem verification
-1. Clear the hard error codes .
-2. Turn the vehicle to the OFF (LOCK) mode.
-3. Wait for at least 6 seconds.
-4. Check for hard error codes .
Is DTC 2610 indicated?
YES
Replace the audio-navigation unit .
NO
Intermittent failure, the system is OK at this time.