DTC B12E5

DTC B12E5  : Incorrect Assembly of Control Unit For Electric Steering Lock Equipped Vehicle

NOTE:  If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A .

DTC (Power Control Unit)

1. Problem verification

   -1. Select model on the HDS screen.

   -2. When prompted by the HDS, select YES when asked if the vehicle has keyless access system, then press and hold the power switch button for at least 2 minutes. This selects the forced ON mode.

   -3. Clear the DTCs with the HDS.

   -4. Turn the vehicle to the OFF (LOCK) mode.

   -5. Press the power switch button.

   -6. Select model on the HDS screen.

   -7. When prompted by the HDS, select YES when asked if the vehicle has keyless access system, then press and hold the power switch button for at least 2 minutes. This selects the forced ON mode.

   -8. Check for DTCs with the HDS.

   DTC Description	DTC
   B12E5 Incorrect assembly of control unit for electric steering lock equipped vehicle

   Is DTC B12E5 indicated?

   YES 

   Incorrect assembly of control unit for electric steering lock equipped vehicle. Replace it with the correct body control module .

   NO 

   Intermittent failure, the system is OK at this time. Check for loose or poor connections.