DTC P16C6
DTC P16C6 : Engine Mount Actuator High Voltage During Function Test
NOTE: Before you troubleshoot, record all freeze data and any on-board snapshots, and review the general troubleshooting information .
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| P16C6 Engine Mount Actuator High Voltage During Function Test |
DTC (Engine Mount Control Unit)
- Problem verification
- 1. Turn the vehicle to the ON mode.
- 2. Clear the DTC with the HDS.
- 3. Start the engine, and let it idle 20 seconds.
- 4. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame DTC (Engine Mount Control Unit)
Are any DTCs indicated?
YES
Go to the indicated DTC's troubleshooting.
NO
Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at the engine mount control unit, the front engine mount actuator, the rear engine mount actuator, and ground G201.