Confirmation Procedure
Operating Condition
- Enter the maintenance mode, then start the engine. Hold the engine speed [Engine Speed] at 3, 000 rpm without load (in P or N) until the radiator fan comes on. After warming up the engine, cancel the maintenance mode.
- Drive the vehicle at a speed between 25 - 55 mph (41 - 88 km/h) for at least 5 minutes.
- Drive immediately at a steady speed between 55 - 75 mph (89 - 120 km/h) for at least 10 seconds.
- Decelerate with the throttle valve fully closed for at least 4 seconds.
- Drive the vehicle in this manner only if the traffic regulations and ambient conditions allow.