Confirmation Procedure

Operating Condition 

• Enter the maintenance mode, then start the engine. Hold the engine speed [Engine Speed] at 3, 000 rpm without load (in P or N) until the radiator fan comes on, then let it idle. After warming up the engine, cancel the maintenance mode.
• Drive at a steady speed between 15 - 75 mph (25 - 120 km/h) for at least 27 seconds.

• When freeze data or the on-board snapshot is stored, drive the vehicle under those conditions instead of Driving Pattern step 2.
• Drive the vehicle in this manner only if the traffic regulations and ambient conditions allow.