VSA Off Switch Test: Test

How to use this service information .

1. VSA OFF Switch - Test

   Preconditions 

   • VSA OFF Switch Removed

   Figure 1 (4P connector type) 

   Courtesy of HONDA, U.S.A., INC.

   Figure 2 (4P connector type) 

   Courtesy of HONDA, U.S.A., INC.

   Figure 3 (12P connector type) 

   Courtesy of HONDA, U.S.A., INC.

   Figure 4 (12P connector type) 

   Courtesy of HONDA, U.S.A., INC.

   Procedure/Specifications 

   • Check the switch according to the table. (Figure 1, 2, 3, and 4)
     NOTE:

     • When an LED is located between terminals, check if the LED lights by connecting power and ground to the LED.
     • Note this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).

   Result 

   • If the result is not as specified, replace the VSA OFF switch.