Confirmation Procedure

Operating Condition 

Courtesy of HONDA, U.S.A., INC.

• Start the engine. Hold the engine speed [Engine Speed] at 3,000 rpm without load (in P or N) until the radiator fan comes on.
• Drive the vehicle at a steady speed of 25 mph (40 km/h) or less, for at least 5 minutes.
• Drive immediately at a steady speed of 36 mph (57 km/h) or more and engine speed [Engine Speed] between 1,200 - 2,600 rpm for at least 5 seconds.
  • Drive the vehicle in this manner only if the traffic regulations and ambient conditions allow.