DTC P0560: Inspection

+B_VBU Circuit Inspection 

NOTICE:  

Before disconnecting the PCM connector, jump the SCS line with the HDS, and wait more than 1 minute.

Test Procedure 

• Preparation
  • PCM connector B (72P): disconnected
• Procedure
  • Perform the inspection according to the following chart.

			(Disconnected) PCM connector B (72P) female terminals
		IG Mode	Courtesy of HONDA, U.S.A., INC.	Normal Conditions
	+B_VBU circuit inspection	OFF		12 V battery voltage [circuit type 1]

Results 

• If it is abnormal, there is a problem in the circuit.

  If the power supply inspection of the above table showed abnormally, do the additional Power Supply Inspection , to locate the failure.

• If it is normal, there is a problem with the PCM.