Confirmation Procedure
Operating Condition
- After the vehicle has been left for an appropriate amount of time as specified, with the engine coolant temperature [ECT Sensor 1] and intake air temperature [IAT Sensor (1)] within the specified range, start the engine.
- Drive the vehicle immediately at a speed between 25 - 75 mph (40 - 120 km/h) for at least 9 minutes.
- After stopping the vehicle, turn the vehicle to the OFF (LOCK) mode and leave the vehicle in this condition for at least 37 minutes (EONV executes).
- Drive the vehicle in this manner only if the traffic regulations and ambient conditions allow.