DTC U0122 (Gauge Control Module): Notes

WARNING: This page is about a different car, the 2023 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.

DTC U0122 : Gauge control module lost communication with VSA modulator-control unit

How to use this manual .

NOTICE:

Before you troubleshoot, review the How to Troubleshoot .

NOTE:

If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A - Refer to: Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode A - Initial Communication and DTC Checks () or Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode B - Control Unit Not Communicating () or Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode 1 and Test Mode 2 (without the HDS) () .
DTC may be stored if VSA modulator-control unit does not start normally.
DTC may be stored due to the power/ground circuit failure of the VSA modulator-control unit. Before this troubleshooting, check the power/ground circuit of the VSA modulator-control unit first.