FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis (Single Page) › Body & Frame › Frames, Subframes & Crossmembers › Frame And Underbody › Repair Instructions › Engine Protection Shield Replacement › Installation Procedure

Installation Procedure

  1. Install the shield to the vehicle.
    2. Fig 1: Engine Protection Shield
    GM794711Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the shield to frame bolts.

    Tighten:  Tighten the bolts to 30 N.m (22 lb ft).

About FixVault