Installation Procedure

IMPORTANT: Do not torque the fasteners until they have all have been started.

Fig 1: Rocker Panel Protector

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Loosely install all of the mounting bolts.
Tighten: Tighten the bolts to 50 N.m (37 lb ft).
Install the EVAP canister vent valve bracket. Refer to EVAP CANISTER VENT VALVE .
Install the assist step if equipped. Refer to Assist Step Replacement (Tubular BVE) or Assist Step Replacement (Removable U Step) .
Lower the vehicle.