FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis (Single Page) › Transmission › Transfer Case - BW 4484 › Repair Instructions › Transfer Case Shift Control Module Replacement › Removal Procedure

Removal Procedure

  1. Remove the knee bolster. Refer to Trim Panel Replacement - Knee Bolster .
  2. Disconnect the shift control module electrical connectors.
    Fig 1: Transfer Case Shift Control Module
    GM860519Courtesy of GENERAL MOTORS CORP.
  3. Reposition the harness.
  4. Remove the module from the vehicle.
About FixVault