FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Body Control System › Repair Instructions › Body Control Module Replacement › Installation Procedure

Installation Procedure

  1. Install the body control module (1) into the bracket.
    Fig 1: Body Control Module
    GM832814Courtesy of GENERAL MOTORS CORP.
  2. Install the I/P carrier. Refer to Instrument Panel (I/P) Carrier Replacement in Instrument Panel, Gages and Console.
  3. Connect the battery negative cables. Refer to Battery Negative Cable Disconnect/Connect Procedure (Single Battery) in Engine Electrical.
  4. Setup the body control modules customized options. Refer to Body Control Module (BCM) Programming/RPO Configuration .
About FixVault