FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Body Control System › Repair Instructions › Body Control Module Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure (Single Battery) in Engine Electrical.
  2. Remove the I/P carrier. Refer to Instrument Panel (I/P) Carrier Replacement in Instrument Panel, Gages and Console.
  3. Remove the body control module (1) from the body control module bracket.
    4. Fig 1: Body Control Module
    GM832802Courtesy of GENERAL MOTORS CORP.
About FixVault