FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Wipers/Washer Systems › Repair Instructions › Washer Solvent Container Level Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Level Sensor
    GM869051Courtesy of GENERAL MOTORS CORP.
  1. Get the level sensor in a horizontal position as shown.
    2. Fig 2: Washer Solvent Level Sensor Electrical Connector
    GM1453811Courtesy of GENERAL MOTORS CORP.
  2. Install the level sensor (6) in the washer solvent container (5). Ensure to reference the locating mark made during removal.
  3. Connect the washer solvent electrical connector.
  4. Install the A/C low pressure switch. Refer to Air Conditioning (A/C) Low Pressure Switch Replacement in Heating, Ventilation and Air Conditioning.
  5. Refill the washer solvent container.
  6. Inspect for leaks.
  7. Close the hood.
About FixVault