FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Body & Frame › Exterior/Interior Trim › Interior Trim › Repair Instructions › Sunshade Replacement › Removal Procedure

Removal Procedure

    Fig 1: Primary Sunshade Retainer
    GM868116Courtesy of GENERAL MOTORS CORP.
  1. Insert a small flat-bladed tool into the access hole to disengage the primary retainer.
    2. Fig 2: Sunshade Elbow & Secondary Retainer
    GM868119Courtesy of GENERAL MOTORS CORP.
  2. Using firm upward pressure, push the sunshade elbow (3) up and rotate it to unlock the secondary retainer (2) from the body.

    When the secondary retainer (2) is disengaged from the body, the elbow (3) and retainer (2) will be recessed into the bezel (1) approximately 1/8 in (12.5 mm).

    3. Fig 3: Sunshade & Bezel
    GM1172628Courtesy of GENERAL MOTORS CORP.
  3. Pull down to remove the sunshade (4) and bezel (3) as a complete assembly.
  4. Disconnect the electrical connection for the vanity mirror.
About FixVault